Select Page

Tolerance Military Standard Dimension as Per Requested Delivery Within 1 Week Heat Treatment Available Trademark ByTune Transport Package Plastic +Bubble+ Carton Box/Wooden Box Specification As per requesteds Origin China, Shenzhen HS Code 7616991090

Product Description

Brief Description

As the title"Worm Gears For Reducer By Rough And Finish Machining" described, this pair of parts is made by the processing craft of rough and finish Machining machining. ByTune machining engineering staffs are experienced and skilled with their rich expert. The worm wheels as the product pictures show they are made by two metal material which are 42CrMo and bronze. And the worm shafts’ material also is different from the gear is the SS303. We finally determined machining this pair of parts with different metal material after our engineers discussed with our customer for several affirmations. So we have strong engineering team for offering professional suggestions and realizing your all requirements.

Material Options For Worm Gears

Engineering Plastic Material:Polyethylene, POM, PTFE, Polyurethane, Polyether ether ketone, Polypropylene, Polyacetal,etc.

Steel Material:Ordinary carbon structural Steel,Quality carbon structural steel, Cast steel,Iron,etc.(Q195,Q215,Q235,Q255,10#,20#,35#,45#,718H,S136,SKD11 )

Stainless SteelMaterial:303,304,316 ( 1.4305,1.4301 ),etc.

WormWheel

Worm gear/worm wheel commonly used cast tin bronze (ZCuSnl0Pl,ZCuSn6Zn6Pb3) and aluminum iron bronze (ZCuAl10Fe3), low – speed and non – important drives can utilize the cast iron (HTl50,HT200). The cast iron bronze has these properties of good friction, good adhesion resistance and slightly lower strength. The cast aluminum-iron bronze character with less friction-reducing, less glue-resistant, high strength and relative effective price. Cast iron: gray, Nodularcastiron, timely treatment for preventing the deformation. The worm wheel can be classified into 3 types: 1.Spur gears, cylindrical gears whose teeth line is parallel to the axis. 2. Helical gear, The teeth on the helical gear are cut at an angle to the surface of the gear, it also can be made into spiral gear.

Worm Shaft

Worm shaft has only one spiral line called single-head worm, otherwise if the worm shaft has two spiral line called double-headed worm. Single-head worm is easier to process than double-head one. However, the wear resistance is worse than double-headed worm.

Company advantages:

2 factories

20 years experience

200 employees

2000 square meters office

ERP system control each flow

Service advantages:

Within 24 hours quotation

3 days for samples preparation

2 weeks for batch regular order

Strict and reliable packaging

Reliable after-sale service

Advanced High Technology Equipments

More than 200 CNC turning & milling machines, most of them are imported from America, Japan and German.

Part Size

Bar capacity up to 2 ¾" diameterUp to 50" diameter

Equipment

Doosan S280N 5 axis

Okuma Captain L370 4 axis

Hitachi-Seiki HVP20J 3 axis

Hardinge Super-Precision 2 axis

Okuma LB15 2 axis

Part Size ( CNC Milling and CNC Turning )

CNC Milling Parts (Max): Length 1030mm,Width 800mm, Height 750mm.CNC Turning Parts (Max): Diamter 680mm,Length 750mm.The size of the above parts are machined in the workshop.

Typical Products

Connectors, Cylinders, Ends,Flanges, Housings, Precision shafts, Sheet,Seals, Sleeve, Lids, Bases…

CONTACT US

NeedingWorm Gears For Reducer By Rough And Finish Machiningorother CNC machining service, just be comfortable to consult us [email protected] with your draws and requirements. Our expert staffs will response you in 24 hours. We are fairly welcom you to come our factories for prompting our friendly cooperation relationship. Waiting for your inquiring!

Basic Info.

Tolerance Military Standard Dimension as Per Requested Delivery Within 1 Week Heat Treatment Available Trademark ByTune Transport Package Plastic +Bubble+ Carton Box/Wooden Box Specification As per requesteds Origin China, Shenzhen HS Code 7616991090

Packaging & Delivery

Package size per unit product 40cm * 40cm * 50cm Gross weight per unit product 10kg

Product Description

Customer Question & Answer Ask something for more details (0)

Brief Description

As the title"Worm Gears For Reducer By Rough And Finish Machining" described, this pair of parts is made by the processing craft of rough and finish Machining machining. ByTune machining engineering staffs are experienced and skilled with their rich expert. The worm wheels as the product pictures show they are made by two metal material which are 42CrMo and bronze. And the worm shafts’ material also is different from the gear is the SS303. We finally determined machining this pair of parts with different metal material after our engineers discussed with our customer for several affirmations. So we have strong engineering team for offering professional suggestions and realizing your all requirements.

Material Options For Worm Gears

Engineering Plastic Material:Polyethylene, POM, PTFE, Polyurethane, Polyether ether ketone, Polypropylene, Polyacetal,etc.

Steel Material:Ordinary carbon structural Steel,Quality carbon structural steel, Cast steel,Iron,etc.(Q195,Q215,Q235,Q255,10#,20#,35#,45#,718H,S136,SKD11 )

Stainless SteelMaterial:303,304,316 ( 1.4305,1.4301 ),etc.

WormWheel

Worm gear/worm wheel commonly used cast tin bronze (ZCuSnl0Pl,ZCuSn6Zn6Pb3) and aluminum iron bronze (ZCuAl10Fe3), low – speed and non – important drives can utilize the cast iron (HTl50,HT200). The cast iron bronze has these properties of good friction, good adhesion resistance and slightly lower strength. The cast aluminum-iron bronze character with less friction-reducing, less glue-resistant, high strength and relative effective price. Cast iron: gray, Nodularcastiron, timely treatment for preventing the deformation. The worm wheel can be classified into 3 types: 1.Spur gears, cylindrical gears whose teeth line is parallel to the axis. 2. Helical gear, The teeth on the helical gear are cut at an angle to the surface of the gear, it also can be made into spiral gear.

Worm Shaft

Worm shaft has only one spiral line called single-head worm, otherwise if the worm shaft has two spiral line called double-headed worm. Single-head worm is easier to process than double-head one. However, the wear resistance is worse than double-headed worm.

Company advantages:

2 factories

20 years experience

200 employees

2000 square meters office

ERP system control each flow

Service advantages:

Within 24 hours quotation

3 days for samples preparation

2 weeks for batch regular order

Strict and reliable packaging

Reliable after-sale service

Advanced High Technology Equipments

More than 200 CNC turning & milling machines, most of them are imported from America, Japan and German.

Part Size

Bar capacity up to 2 ¾" diameterUp to 50" diameter

Equipment

Doosan S280N 5 axis

Okuma Captain L370 4 axis

Hitachi-Seiki HVP20J 3 axis

Hardinge Super-Precision 2 axis

Okuma LB15 2 axis

Part Size ( CNC Milling and CNC Turning )

CNC Milling Parts (Max): Length 1030mm,Width 800mm, Height 750mm.CNC Turning Parts (Max): Diamter 680mm,Length 750mm.The size of the above parts are machined in the workshop.

Typical Products

Connectors, Cylinders, Ends,Flanges, Housings, Precision shafts, Sheet,Seals, Sleeve, Lids, Bases…

CONTACT US

NeedingWorm Gears For Reducer By Rough And Finish Machiningorother CNC machining service, just be comfortable to consult us [email protected] with your draws and requirements. Our expert staffs will response you in 24 hours. We are fairly welcom you to come our factories for prompting our friendly cooperation relationship. Waiting for your inquiring!