Select Page

“H” Class Mill Chain is an ex-tremely robust, serviceable chain initially de-signed for heavy drives and transfer conveyor purposes in saw mills along with the paper and pulp marketplace. “H” Class Chain has established itself for innumerable other industrial applications at the same time, primarily for reasonable duty in abrasive atmospheres in which hefty, rugged chain is re-quired.
The sidebars from the “H” Class hyperlinks are rein-forced with wearing sneakers which strengthen and stiffen the back links when it is actually operated in troughs or above ?oors and runways.
Pin holes are precision cored to assure accu-rate pitch sizes, which range from 2.308 to 4.000 inches. “H” Class Chain is available in the two riveted and cottered development. T-head pins engage two lugs cast on the links’ side-bars. This con?guration prohibits pin rotation for the duration of chain operation, getting rid of abrasive wear and pitch elongation.
“H” Class Chain conforms to manufacturer’s standards and it is wholly interchangeable with chains of other makers. “H” Class Chain is accessible in -Locke Promal with tensile ranges of 9,450 to forty,500 pounds.
“H” Class Chain might operate in two instructions. As being a drive chain, it travels from the route on the closed barrel; for elevator or conveyor applications, it should travel towards the open ends of your backlinks.
Brutaloy or cast steel sprockets are available to accommodate every “H” Class pitch size. A broad assortment of attachments can also be avail-able for varied chain applications.

“H” Class Mill Chain is definitely an ex-tremely sturdy, serviceable chain initially de-signed for hefty drives and transfer conveyor functions in saw mills and the paper and pulp sector. “H” Class Chain has proven itself for innumerable other industrial applications also, specially for moderate duty in abrasive atmospheres in which heavy, rugged chain is re-quired.
The sidebars from the “H” Class back links are rein-forced with sporting footwear which strengthen and stiffen the hyperlinks when it can be operated in troughs or above ?oors and runways.
Pin holes are precision cored to assure accu-rate pitch sizes, which range from two.308 to 4.000 inches. “H” Class Chain is available in both riveted and cottered construction. T-head pins engage two lugs cast within the links’ side-bars. This con?guration prohibits pin rotation for the duration of chain operation, eliminating abrasive wear and pitch elongation.
“H” Class Chain conforms to manufacturer’s standards and is entirely interchangeable with chains of other suppliers. “H” Class Chain is available in -Locke Promal with tensile ranges of 9,450 to forty,500 lbs.
“H” Class Chain could operate in two directions. As a drive chain, it travels while in the course with the closed barrel; for elevator or conveyor applications, it really should travel towards the open ends on the hyperlinks.
Brutaloy or cast steel sprockets can be found to accommodate every “H” Class pitch size. A wide assortment of attachments is additionally avail-able for varied chain applications.