Select Page

Rugged development Type “MD” Buckets are most popular for basic function elevators. Covering a broad range of sizes from 4 to 20 inches long, they can be made use of for ?ne and medium dimension components such as coal, cement, pulp, grain, ear corn, etc. They can be widely utilized for heavy abrasive components such as sand, gravel, and stone. Reinforced front lips give Fashion “MD” Buckets an extended sporting digging edge. Uniform wall thickness and powerful corner reinforcement make them stronger than steel buckets with the exact same gauge.They can be smoothly surfaced and have ends sloped inward at six degree angles to insure proper ?lling and clean discharge. Offered in Malleable and Al-lied-Locke Promal.
Chain for which buckets are available in-clude: Steel Bushed Roller, Steel Bushed, Combination, “H” Class Mill, 400 Class Pin-tle, and 700 Class Pintle. “MD” Buckets are utilized with G1, G6, K1, or K2 design attach-ments when they can be found within the chain variety.
Capacities are for buckets ?lled on the line XX (see diagram). The sensible working capacity will differ with all the loading problems, angle of re-pose with the material being dealt with, plus the incli-nation in the elevator.
Fashion “AC” ELEVATOR BUCKETS for managing cement, lime, and ?uffy products
Type “AC” Buckets supply quick, thorough discharge of cement, lime, as well as other dry, ?uffy supplies. Vent holes inside the bottom of each bucket release trapped air in ?lling and permit material to empty from bucket promptly and totally on discharge. Additionally to reinforcing lips, hooded backs reinforce “AC” Fashion Buckets. This function permits closer bucket spacing and gives 30% greater carrying capability than other bucket styles with the very same length. These sturdy buckets have an extra thickness of metal at wear factors for longer services. Accessible in Al-lied-Locke Malleable and Promal.
Design “AC” Buckets usually are employed with heavy duty engineering chain such as Bushed Steel Chain with K2 and K3 style attachments.
Capacities are for buckets ?lled to both line XX or YY (see diagram). The useful operat-ing capacity will differ with loading disorders, angle of repose on the material getting dealt with, as well as the inclination in the elevator.