Item Description
RV25 Collection Flange Variety Aluminum Material Worm Speed Gear Box Reducer
Input Configurations |
Double or solitary input shaft (NRV) |
PAM / IEC motor input shaft with circle or square flange (NMRV) |
|
Output Configurations
|
Double or solitary output shaft |
Output flange |
Major Characteristic
The gearbox can rotate in the two instructions run and is made up of 1 oil filling at delivery. you will benefit from its high quality and a short delivery time.
Specification
Product |
Motor Input Flange (circle) |
Transmission Ratio |
Electrical power (kw) |
Ratio (i) |
Nominal Torque (Nm) |
|||||||||||||||
PAM / IEC |
Internal Dia. |
Dis. In between Diagonal Screw Holes |
External Dia. |
Width of Important Slot |
five |
seven.5 |
10 |
fifteen |
twenty |
25 |
30 |
forty |
50 |
60 |
eighty |
a hundred |
||||
N |
M |
P |
E |
Diamter of Enter Shaft |
||||||||||||||||
NMRV25 |
56B14 |
fifty |
65 |
80 |
three |
9 |
– |
9 |
– |
.06 |
seven.5-60 |
two.6-fourteen |
||||||||
NMRV30 |
63B5 |
95 |
115 |
140 |
4 |
11 |
– |
.06-.18 |
seven.5-80 |
two.6-14 |
||||||||||
63B14 |
60 |
75 |
ninety |
|||||||||||||||||
56B5 |
80 |
a hundred |
120 |
three |
nine |
– |
||||||||||||||
56B14 |
fifty |
65 |
80 |
|||||||||||||||||
NMRV40 |
71B5 |
a hundred and ten |
130 |
a hundred and sixty |
five |
14 |
– |
.09-.37 |
7.5-100 |
eleven-fifty three |
||||||||||
71B14 |
70 |
eighty five |
one hundred and five |
|||||||||||||||||
63B5 |
95 |
a hundred and fifteen |
a hundred and forty |
four |
eleven |
|||||||||||||||
63B14 |
60 |
seventy five |
90 |
|||||||||||||||||
56B5 |
eighty |
a hundred |
a hundred and twenty |
3 |
– |
nine |
||||||||||||||
NMRV50 |
80B5 |
a hundred thirty |
a hundred sixty five |
200 |
six |
19 |
– |
.twelve-.seventy five |
seven.5-100 |
21-89 |
||||||||||
80B14 |
eighty |
a hundred |
one hundred twenty |
|||||||||||||||||
71B5 |
110 |
one hundred thirty |
160 |
5 |
fourteen |
– |
||||||||||||||
71B14 |
70 |
eighty five |
a hundred and five |
|||||||||||||||||
63B5 |
ninety five |
a hundred and fifteen |
140 |
4 |
– |
11 |
||||||||||||||
NMRV63 |
90B5 |
one hundred thirty |
165 |
200 |
eight |
24 |
– |
.25-1.5 |
seven.5-a hundred |
56-166 |
||||||||||
90B14 |
ninety five |
115 |
140 |
|||||||||||||||||
80B5 |
one hundred thirty |
165 |
200 |
6 |
19 |
– |
||||||||||||||
80B14 |
80 |
100 |
one hundred twenty |
|||||||||||||||||
71B5 |
a hundred and ten |
one hundred thirty |
one hundred sixty |
5 |
– |
fourteen |
||||||||||||||
71B14 |
70 |
85 |
one hundred and five |
|||||||||||||||||
NMRV75 |
100/112B5 |
180 |
215 |
250 |
eight |
– |
28 |
– |
.fifty five-4 |
7.5-a hundred |
90-269 |
|||||||||
one hundred/112B14 |
110 |
a hundred thirty |
one hundred sixty |
|||||||||||||||||
90B5 |
a hundred thirty |
165 |
200 |
eight |
24 |
– |
||||||||||||||
90B14 |
ninety five |
a hundred and fifteen |
a hundred and forty |
|||||||||||||||||
80B5 |
one hundred thirty |
one hundred sixty five |
two hundred |
6 |
– |
19 |
||||||||||||||
80B14 |
eighty |
100 |
a hundred and twenty |
|||||||||||||||||
71B5 |
110 |
a hundred thirty |
a hundred and sixty |
– |
– |
14 |
||||||||||||||
NMRV90 |
a hundred/112B5 |
a hundred and eighty |
215 |
250 |
eight |
– |
28 |
– |
.55-four |
seven.5-100 |
a hundred and one-458 |
|||||||||
a hundred/112B14 |
a hundred and ten |
a hundred thirty |
a hundred and sixty |
|||||||||||||||||
90B5 |
130 |
a hundred sixty five |
200 |
eight |
24 |
– |
||||||||||||||
90B14 |
ninety five |
one hundred fifteen |
one hundred forty |
|||||||||||||||||
80B5 |
130 |
165 |
200 |
6 |
– |
19 |
||||||||||||||
80B14 |
80 |
a hundred |
120 |
|||||||||||||||||
NMRV110 |
132B5 |
230 |
265 |
300 |
10 |
– |
38 |
– |
1.1-7.5 |
7.5-a hundred |
242-660 |
|||||||||
132B14 |
one hundred thirty |
one hundred sixty five |
200 |
– |
||||||||||||||||
a hundred/112B5 |
a hundred and eighty |
215 |
250 |
8 |
28 |
– |
||||||||||||||
90B5 |
130 |
a hundred sixty five |
two hundred |
– |
24 |
|||||||||||||||
90B14 |
95 |
one hundred fifteen |
140 |
– |
||||||||||||||||
80B5 |
one hundred thirty |
a hundred sixty five |
200 |
– |
19 |
|||||||||||||||
NMRV130 |
132B5 |
230 |
265 |
300 |
ten |
– |
38 |
– |
2.2-7.5 |
7.5-100 |
333-1596 |
|||||||||
132B14 |
130 |
a hundred sixty five |
200 |
– |
||||||||||||||||
a hundred/112B5 |
one hundred eighty |
215 |
250 |
8 |
– |
28 |
||||||||||||||
90B5 |
one hundred thirty |
one hundred sixty five |
two hundred |
– |
– |
24 |
||||||||||||||
90B14 |
95 |
one hundred fifteen |
one hundred forty |
|||||||||||||||||
NMRV150 |
160B5 |
250 |
three hundred |
350 |
12 |
– |
42 |
– |
two.2-15 |
seven.5-100 |
570-1760 |
|||||||||
132B5 |
230 |
265 |
three hundred |
ten |
– |
38 |
– |
|||||||||||||
132B14 |
130 |
one hundred sixty five |
200 |
– |
||||||||||||||||
100/112B5 |
one hundred eighty |
215 |
250 |
eight |
– |
28 |
Organization profile
State of affairs
Packing
FAQ
Q1: I want to get your merchandise, how can I pay out?
A: You can pay by way of T/T(thirty%+70%), L/C ,D/P and so on.
Q2: How can you assure the good quality?
A: A single year’s guarantee from B/L date. If you meet up with with high quality problem, make sure you ship us photographs or video clip to check, we assure to send spare parts or new products to exchange. Our promise not incorporate inappropriate procedure or wrong specification assortment.
Q3: How we decide on types and specifications?
A: You can e mail us the collection code (for case in point: RC series helical gearbox) as properly as prerequisite specifics, this kind of as motor power,output speed or ratio, support factor or your software…as much information as feasible. If you can source some photographs or drawings,it is nice.
Q4: If we do not uncover what we want on your internet site, what need to we do?
A: We offer you 3 choices:
1, You can e mail us the pictures, drawings or descriptions details. We will try out to design your items on the foundation of our
standard models.
two, Our R&D department is specialist for OEM/ODM goods by drawing/samples, you can ship us samples, we do custom-made design and style for your bulk purchasing.
3, We can produce new merchandise if they have excellent market. We have previously developed a lot of things for specific using successful, this sort of as specific gearbox for agitator, cement conveyor, sneakers equipment and so on.
Q5: Can we acquire 1 laptop of each and every item for high quality screening?
A: Of course, we are happy to acknowledge trial order for quality testing.
Q6: How about your item shipping time?
A: Usually for 20’container, it requires 25-thirty workdays for RV series worm gearbox, 35-forty workdays for helical gearmotors.
US $18-35 / Piece | |
20 Pieces (Min. Order) |
###
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | B3,B6,B7,B8,V5,V6 |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
###
Customization: |
Available
|
---|
###
Input Configurations
|
Double or single input shaft (NRV)
|
PAM / IEC motor input shaft with circle or square flange (NMRV)
|
|
Output Configurations
|
Double or single output shaft
|
Output flange
|
###
Model
|
Motor Input Flange (circle)
|
Transmission Ratio
|
Power
(kw)
|
Ratio
(i)
|
Nominal Torque
(Nm)
|
|||||||||||||||
PAM / IEC
|
Internal Dia.
|
Dis. Between Diagonal Screw Holes
|
External Dia.
|
Width of Key Slot
|
5
|
7.5
|
10
|
15
|
20
|
25
|
30
|
40
|
50
|
60
|
80
|
100
|
||||
N
|
M
|
P
|
E
|
Diamter of Input Shaft
|
||||||||||||||||
NMRV25
|
56B14
|
50
|
65
|
80
|
3
|
9
|
–
|
9
|
–
|
0.06
|
7.5-60
|
2.6-14
|
||||||||
NMRV30
|
63B5
|
95
|
115
|
140
|
4
|
11
|
–
|
0.06-0.18
|
7.5-80
|
2.6-14
|
||||||||||
63B14
|
60
|
75
|
90
|
|||||||||||||||||
56B5
|
80
|
100
|
120
|
3
|
9
|
–
|
||||||||||||||
56B14
|
50
|
65
|
80
|
|||||||||||||||||
NMRV40
|
71B5
|
110
|
130
|
160
|
5
|
14
|
–
|
0.09-0.37
|
7.5-100
|
11-53
|
||||||||||
71B14
|
70
|
85
|
105
|
|||||||||||||||||
63B5
|
95
|
115
|
140
|
4
|
11
|
|||||||||||||||
63B14
|
60
|
75
|
90
|
|||||||||||||||||
56B5
|
80
|
100
|
120
|
3
|
–
|
9
|
||||||||||||||
NMRV50
|
80B5
|
130
|
165
|
200
|
6
|
19
|
–
|
0.12-0.75
|
7.5-100
|
21-89
|
||||||||||
80B14
|
80
|
100
|
120
|
|||||||||||||||||
71B5
|
110
|
130
|
160
|
5
|
14
|
–
|
||||||||||||||
71B14
|
70
|
85
|
105
|
|||||||||||||||||
63B5
|
95
|
115
|
140
|
4
|
–
|
11
|
||||||||||||||
NMRV63
|
90B5
|
130
|
165
|
200
|
8
|
24
|
–
|
0.25-1.5
|
7.5-100
|
56-166
|
||||||||||
90B14
|
95
|
115
|
140
|
|||||||||||||||||
80B5
|
130
|
165
|
200
|
6
|
19
|
–
|
||||||||||||||
80B14
|
80
|
100
|
120
|
|||||||||||||||||
71B5
|
110
|
130
|
160
|
5
|
–
|
14
|
||||||||||||||
71B14
|
70
|
85
|
105
|
|||||||||||||||||
NMRV75
|
100/112B5
|
180
|
215
|
250
|
8
|
–
|
28
|
–
|
0.55-4
|
7.5-100
|
90-269
|
|||||||||
100/112B14
|
110
|
130
|
160
|
|||||||||||||||||
90B5
|
130
|
165
|
200
|
8
|
24
|
–
|
||||||||||||||
90B14
|
95
|
115
|
140
|
|||||||||||||||||
80B5
|
130
|
165
|
200
|
6
|
–
|
19
|
||||||||||||||
80B14
|
80
|
100
|
120
|
|||||||||||||||||
71B5
|
110
|
130
|
160
|
–
|
–
|
14
|
||||||||||||||
NMRV90
|
100/112B5
|
180
|
215
|
250
|
8
|
–
|
28
|
–
|
0.55-4
|
7.5-100
|
101-458
|
|||||||||
100/112B14
|
110
|
130
|
160
|
|||||||||||||||||
90B5
|
130
|
165
|
200
|
8
|
24
|
–
|
||||||||||||||
90B14
|
95
|
115
|
140
|
|||||||||||||||||
80B5
|
130
|
165
|
200
|
6
|
–
|
19
|
||||||||||||||
80B14
|
80
|
100
|
120
|
|||||||||||||||||
NMRV110
|
132B5
|
230
|
265
|
300
|
10
|
–
|
38
|
–
|
1.1-7.5
|
7.5-100
|
242-660
|
|||||||||
132B14
|
130
|
165
|
200
|
–
|
||||||||||||||||
100/112B5
|
180
|
215
|
250
|
8
|
28
|
–
|
||||||||||||||
90B5
|
130
|
165
|
200
|
–
|
24
|
|||||||||||||||
90B14
|
95
|
115
|
140
|
–
|
||||||||||||||||
80B5
|
130
|
165
|
200
|
–
|
19
|
|||||||||||||||
NMRV130
|
132B5
|
230
|
265
|
300
|
10
|
–
|
38
|
–
|
2.2-7.5
|
7.5-100
|
333-1596
|
|||||||||
132B14
|
130
|
165
|
200
|
–
|
||||||||||||||||
100/112B5
|
180
|
215
|
250
|
8
|
–
|
28
|
||||||||||||||
90B5
|
130
|
165
|
200
|
–
|
–
|
24
|
||||||||||||||
90B14
|
95
|
115
|
140
|
|||||||||||||||||
NMRV150
|
160B5
|
250
|
300
|
350
|
12
|
–
|
42
|
–
|
2.2-15
|
7.5-100
|
570-1760
|
|||||||||
132B5
|
230
|
265
|
300
|
10
|
–
|
38
|
–
|
|||||||||||||
132B14
|
130
|
165
|
200
|
–
|
||||||||||||||||
100/112B5
|
180
|
215
|
250
|
8
|
–
|
28
|
US $18-35 / Piece | |
20 Pieces (Min. Order) |
###
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | B3,B6,B7,B8,V5,V6 |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
###
Customization: |
Available
|
---|
###
Input Configurations
|
Double or single input shaft (NRV)
|
PAM / IEC motor input shaft with circle or square flange (NMRV)
|
|
Output Configurations
|
Double or single output shaft
|
Output flange
|
###
Model
|
Motor Input Flange (circle)
|
Transmission Ratio
|
Power
(kw)
|
Ratio
(i)
|
Nominal Torque
(Nm)
|
|||||||||||||||
PAM / IEC
|
Internal Dia.
|
Dis. Between Diagonal Screw Holes
|
External Dia.
|
Width of Key Slot
|
5
|
7.5
|
10
|
15
|
20
|
25
|
30
|
40
|
50
|
60
|
80
|
100
|
||||
N
|
M
|
P
|
E
|
Diamter of Input Shaft
|
||||||||||||||||
NMRV25
|
56B14
|
50
|
65
|
80
|
3
|
9
|
–
|
9
|
–
|
0.06
|
7.5-60
|
2.6-14
|
||||||||
NMRV30
|
63B5
|
95
|
115
|
140
|
4
|
11
|
–
|
0.06-0.18
|
7.5-80
|
2.6-14
|
||||||||||
63B14
|
60
|
75
|
90
|
|||||||||||||||||
56B5
|
80
|
100
|
120
|
3
|
9
|
–
|
||||||||||||||
56B14
|
50
|
65
|
80
|
|||||||||||||||||
NMRV40
|
71B5
|
110
|
130
|
160
|
5
|
14
|
–
|
0.09-0.37
|
7.5-100
|
11-53
|
||||||||||
71B14
|
70
|
85
|
105
|
|||||||||||||||||
63B5
|
95
|
115
|
140
|
4
|
11
|
|||||||||||||||
63B14
|
60
|
75
|
90
|
|||||||||||||||||
56B5
|
80
|
100
|
120
|
3
|
–
|
9
|
||||||||||||||
NMRV50
|
80B5
|
130
|
165
|
200
|
6
|
19
|
–
|
0.12-0.75
|
7.5-100
|
21-89
|
||||||||||
80B14
|
80
|
100
|
120
|
|||||||||||||||||
71B5
|
110
|
130
|
160
|
5
|
14
|
–
|
||||||||||||||
71B14
|
70
|
85
|
105
|
|||||||||||||||||
63B5
|
95
|
115
|
140
|
4
|
–
|
11
|
||||||||||||||
NMRV63
|
90B5
|
130
|
165
|
200
|
8
|
24
|
–
|
0.25-1.5
|
7.5-100
|
56-166
|
||||||||||
90B14
|
95
|
115
|
140
|
|||||||||||||||||
80B5
|
130
|
165
|
200
|
6
|
19
|
–
|
||||||||||||||
80B14
|
80
|
100
|
120
|
|||||||||||||||||
71B5
|
110
|
130
|
160
|
5
|
–
|
14
|
||||||||||||||
71B14
|
70
|
85
|
105
|
|||||||||||||||||
NMRV75
|
100/112B5
|
180
|
215
|
250
|
8
|
–
|
28
|
–
|
0.55-4
|
7.5-100
|
90-269
|
|||||||||
100/112B14
|
110
|
130
|
160
|
|||||||||||||||||
90B5
|
130
|
165
|
200
|
8
|
24
|
–
|
||||||||||||||
90B14
|
95
|
115
|
140
|
|||||||||||||||||
80B5
|
130
|
165
|
200
|
6
|
–
|
19
|
||||||||||||||
80B14
|
80
|
100
|
120
|
|||||||||||||||||
71B5
|
110
|
130
|
160
|
–
|
–
|
14
|
||||||||||||||
NMRV90
|
100/112B5
|
180
|
215
|
250
|
8
|
–
|
28
|
–
|
0.55-4
|
7.5-100
|
101-458
|
|||||||||
100/112B14
|
110
|
130
|
160
|
|||||||||||||||||
90B5
|
130
|
165
|
200
|
8
|
24
|
–
|
||||||||||||||
90B14
|
95
|
115
|
140
|
|||||||||||||||||
80B5
|
130
|
165
|
200
|
6
|
–
|
19
|
||||||||||||||
80B14
|
80
|
100
|
120
|
|||||||||||||||||
NMRV110
|
132B5
|
230
|
265
|
300
|
10
|
–
|
38
|
–
|
1.1-7.5
|
7.5-100
|
242-660
|
|||||||||
132B14
|
130
|
165
|
200
|
–
|
||||||||||||||||
100/112B5
|
180
|
215
|
250
|
8
|
28
|
–
|
||||||||||||||
90B5
|
130
|
165
|
200
|
–
|
24
|
|||||||||||||||
90B14
|
95
|
115
|
140
|
–
|
||||||||||||||||
80B5
|
130
|
165
|
200
|
–
|
19
|
|||||||||||||||
NMRV130
|
132B5
|
230
|
265
|
300
|
10
|
–
|
38
|
–
|
2.2-7.5
|
7.5-100
|
333-1596
|
|||||||||
132B14
|
130
|
165
|
200
|
–
|
||||||||||||||||
100/112B5
|
180
|
215
|
250
|
8
|
–
|
28
|
||||||||||||||
90B5
|
130
|
165
|
200
|
–
|
–
|
24
|
||||||||||||||
90B14
|
95
|
115
|
140
|
|||||||||||||||||
NMRV150
|
160B5
|
250
|
300
|
350
|
12
|
–
|
42
|
–
|
2.2-15
|
7.5-100
|
570-1760
|
|||||||||
132B5
|
230
|
265
|
300
|
10
|
–
|
38
|
–
|
|||||||||||||
132B14
|
130
|
165
|
200
|
–
|
||||||||||||||||
100/112B5
|
180
|
215
|
250
|
8
|
–
|
28
|
Is a worm gear reducer right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer is right for your application, you’ve come to the right place. This gear reducer is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer
Worm reducer is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducers require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducers produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducers, so they can be used in tight spaces and applications where space is limited.
Worm gear reducers are an excellent choice for applications requiring high torque and low speeds. These reducers are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducers are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducers are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducers are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducers have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer is typically much hotter than a hypoid reducer, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducers are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducers have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer can produce the same amount of output as a 1/2 HP hypoid reducer. A Nissei Corporation study compared the two types of reducers, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer.
The efficiency of a worm gear reducer depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer also have an impact on its efficiency. As a result, worm gear reducers should be used with the right type of lubricant.
In a worm gear reducer, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer is also quiet and has a low friction coefficient.
It has a low clearance
Worm Reducers are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer is a versatile gear train that provides a high torque-to-weight ratio. These reducers are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducers are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducers, worm gear reducers are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducers are one of the most popular types of reducers. It provides high torque and high speed ratio in a compact package. These reducers are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducers come in a variety of shapes and sizes, including parallel shaft reducers and planetary worm reducers. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by czh 2022-11-29